Trees grow in weird and wonderful ways, and that is what makes them unique and special. However, some trees may develop overextending limbs because they are reaching for the light or can form weak attachments. These can lead to a potential threat to people and property in an urban environment, and that’s where tree cabling can come in handy.
In this article, we will be focusing on propping, guying, bracing, and cabling trees. There are several methods you can implement to support your trees. Keep reading to find out what you can do to help your trees grow healthier!
Tree Cabling – Supporting Trees and Impacting Growth
Some homeowners are unsure of how it actually works and concerns about looks may rise. However, tree cabling is almost unnoticeable in most cases. Cabling is not just wrapping cables around the tree. The idea behind this process is to stretch the cables individually from one limb to another. Also, the cables are not wrapped around the tree, they are installed in the canopy.
Why is it Important?
There are three main reasons why cabling trees is important for your trees’ structure and support:
- Protection – If a tree is located over a frequently populated location like a footpath, bench, or over a property, it is very important to mitigate the chance of failure in a potentially hazardous tree.
- Preservation – Some trees have aesthetic or amenity value. These trees need to be preserved when they’re weak or damaged.
- Prevention – Healthy trees sometimes have weak crotches/unions. We want to reduce the chances of limb failure in these situations.
Usually, tree services Frisco will use one of the direct cable technique. In other words, two limbs are connected via a single cable. However, in some cases, more cables will be required due to the nature of a tree to support it. The cables reduce stress and movement on the weak spots of a tree. This mitigates the risk of failure and protects the limbs from getting damaged.
The Installation Process
The first step is to find a trustable and professional tree service Texas company. From there, professionals will be able to determine the most appropriate hardware. Several different wire cabling can be used for cabling trees. Extra-high strength cables with some special systems are usually preferred by professionals for cabling.
One of the experts will then climb the tree and locate a position between the end of the branches and the point of weakness. The wood needs to be large enough to provide adequate support and to be structurally sound to hold the hardware. After finding the installation point, a professional will drill a hole for the cable through both stems.
The cable is then threaded through the holes, but keep in mind to keep the cable’s pull in direct line with the weak point. The wire stop is then installed when one end of the cable is installed. Once the second end of the cable is temporarily set and the come-along is engaged, a professional will check the cable for the tension.
The cables need to be adjusted right, not too tight, and not too slack. This is why you want to have professional help since adjusting the cables in a wrong way can damage your trees.
Q: Does cabling hurt a tree?
A: Cabling your trees in Frisco will make them stronger and more resistant to movement and damage. When tree branches are too heavy, they start putting pressure on the trunk and can break off easily. Cabling will fix this, just make sure you get help from a professional to avoid damaging your tree.
Q: Should I cable my tree?
A: If your trees in Frisco have become stressed or weakened to a point they mitigate the risk of failure, cabling them is probably the best thing you can do. The cables should not restrict the movement, but they should reduce it, and that allows your trees to deal with the stress from movement.
Q: How do you cable a tree?
A: To cable your trees in Frisco, you are going to need two J lag hooks. You will have to find a specific point of weakness and install them, then attach a cable and start tightening it. Keep in mind that this process can be quite hard, so getting professional help is highly recommended.
Local Tree Experts Overview
Tree cabling is a difficult process, but it can be very useful and helpful to your trees, especially if they are old and already stressed enough. Finding the point of weakness is crucial, and tightening the J-lags just enough will determine whether your tree will continue to live or whether it will start falling apart. Don’t hesitate to hire your local arborist to get much-needed help!